Acer V3-7710 Generic User Manual Download

Page: 62 / 80

Englis

Inserting an ExpressCard

Insert the card into the slot and push gently until it clicks into position.

Ejecting an ExpressCard

Before ejecting an ExpressCard:

Exit the application using the card.

Left-click the remove hardware icon on the taskbar and stop the card
operation.

Push the card gently into the slot and release to pop out the card. Then pull
the card free from the slot.

Installing memory

Note

: Information in this section may not apply to your computer.

Follow these steps to install memory:

Turn off the computer, unplug the AC adapter (if connected) and remove the
battery pack. Then turn the computer over to access its base.

Remove the screws from the memory cover; then lift and remove the memory
cover.

EXPRESS CARD

Summary of Contents for V3-7710

















































































Search results

Summary of Contents for V3-7710

Reviews:

Related manuals for V3-7710

Brands by name

Popular brands

Acer V3-7710, Generic User Manual

Search results

Summary of Contents for V3-7710

Reviews:

Related manuals for V3-7710

Brands by name

Popular brands