background image

x

Englis

h

Emergency calls

Warning: 

You cannot make emergency calls through this device. To make an 

emergency call you shall dial out through your mobile phone or other telephone call 
system.

Disposal instructions

Do not throw this electronic device into the trash when discarding. 
To minimize pollution and ensure utmost protection of the global 
environment, please recycle. For more information on the Waste from 
Electrical and Electronics Equipment (WEEE) regulations, visit 

www.acer-group.com/public/Sustainability/sustainability01.htm

Mercury advisory

For bulb-inside projectors or electronic products containing a non-LED-
backlit-LCD/CRT monitor or display: Lamp(s) inside this product contain 
mercury and must be recycled or disposed of according to local, state 
or federal laws. For more information, contact the Electronic Industries Alliance at 

www.eiae.org

. For lamp-specific disposal information, check 

www.lamprecycle.org

.

ENERGY STAR

Acer's ENERGY STAR qualified products save your money by 
reducing energy cost and protecting the environment without 
sacrificing features or performance. Acer is proud to offer our 
customers products with the ENERGY STAR mark. 

What is ENERGY STAR?

Products that are ENERGY STAR qualified use less energy and 

prevent greenhouse gas emissions by meeting strict energy efficiency guidelines 
set by the U.S. Environmental Protection Agency. Acer is committed to offering 
products and services worldwide that help customers save money, conserve energy 
and improve the quality of our environment. The more energy we can save through 
higher energy efficiency, the more we reduce greenhouse gases and the risks of 
climate change. More information refers to 

www.energystar.gov

 or 

www.energystar.gov/powermanagement

.

Note

: Information in this section may not apply to your computer.

Acer ENERGY STAR qualified products:

Produce less heat and reduce cooling loads, and warmer climates. 

Automatically go into "display sleep" and "computer sleep" mode after 
10 and 30 minutes of inactivity respectively.

Wake the computer from sleep mode by pushing keyboard or moving 
mouse.

Summary of Contents for V3-7710

















































































Reviews: