50
Englis
h
I want to eject the optical drive tray without turning on the power.
There is a mechanical eject hole on the optical drive. Simply insert the tip of a pen
or paperclip into the hole and push to eject the tray.
The keyboard does not respond.
Try attaching an external keyboard to a USB port on the
computer. If it works,
contact your dealer or an authorized service center as the internal keyboard cable
may be loose.
The printer does not work.
Check the following:
•
Make sure that the printer is connected to a power outlet and that it is turned
on.
•
Make sure that the printer cable is connected securely to a USB port and the
corresponding port on the printer.
I want to restore my computer to its original settings without
recovery CDs.
Note:
If your system is the multilingual version, the operating system
and language you choose when you first turn on the system will be
the only option for future recovery operations.
This recovery process helps you restore the C: drive with the original software
content that is installed when you purchased
your notebook. Follow the steps
below to rebuild your C: drive.
(Your C: drive will be reformatted and all data will be
erased.) It is important to back up all data files before using this option.
Before performing a restore operation, please check the BIOS settings.
1
Check to see if
Acer disk-to-disk recovery
is enabled or not.
2
Make sure the
D2D Recovery
setting in
Main
is
Enabled
.
3
Exit the BIOS utility and save changes. The system will reboot.
Note:
To activate the BIOS utility, press <
F2
> during POST.
To start the recovery process:
1
Restart the system.
2
While the Acer logo is showing, press <
Alt
> + <
F10
> at the same time to enter
the recovery process.
3
Refer to the onscreen instructions to perform system recovery.
