Acer V3-7710 Generic User Manual Download

Page: 34 / 80

Englis

Creating a recovery backup (USB flash drive)

To reinstall using a backup on a USB flash drive, you must create the recovery
backup beforehand. Throughout the process, you will be guided by onscreen
instructions. Please read them carefully!

Important

: If you are using a USB flash drive, ensure it is at least 12

GB and does not contain any previous data.

Important

: This section only applies to computers without an optical

drive.

Click

Start

All Programs

Acer

, then click

Acer eRecovery Management

To create recovery backup for the hard drive’s entire original contents,
including Windows and all factory-loaded software and drivers, click

Create

Factory Default Backup

- OR -

To create a recovery backup for only the factory-loaded software and drivers, click

Create Driver and Applications Backup

Important

: We recommend that you create each type of recovery

backup as soon as possible.

Summary of Contents for V3-7710

















































































Search results

Summary of Contents for V3-7710

Reviews:

Related manuals for V3-7710

Brands by name

Popular brands

Acer V3-7710, Generic User Manual

Search results

Summary of Contents for V3-7710

Reviews:

Related manuals for V3-7710

Brands by name

Popular brands