100
Chapter 3
Removing the LCD Brackets and FPC Cable
1.
Remove the LCD panel. See “Removing the LCD Panel” on page 99.
2.
Turn the LCD panel over to expose the rear. Detach the camera cable from the LCD panel as shown.
3.
Lift the adhesive strip as shown, and disconnect the LCD cable interface.
4.
Grip the FPC cable and lift upward to detach the adhesive pads.
5.
Remove the eight securing screws (four on each side) from the LCD Panel brackets. Remove the LCD
brackets by pulling them away from the LCD Panel.
Step
Size
Quantity
Screw Type
LCD Brackets
M2*4
8
Summary of Contents for TravelMate 6493 Series
