96
Chapter 3
Removing the LCD Bezel
1.
Remove the LCD module. See “Removing the LCD Module” on page 75.
2.
Remove the two upper and two lower bezel screw caps. Remove the four securing screws from the LCD
module.
3.
Lift up the bezel, left side first as shown followed by the bottom and right sides respectively.
CAUTION:
The LCD panel locking latches pass through the top of the bezel. Hold the lock in the open position
to allow the latches to pass through the bezel when removing the top section.
Step
Size
Quantity
Screw Type
LCD Bezel
M2.5*4
4
Summary of Contents for TravelMate 6493 Series
