Acer TravelMate 4730 Series Service Manual Download | Manualshive

Page: 5 / 194

background image

V

Preface

Before using this information and the product it supports, please read the following general information.

1.

This Service Guide provides you with all technical information relating to the BASIC CONFIGURATION
decided for Acer's

global

product offering. To better fit local market requirements and enhance product

competitiveness, your regional office MAY have decided to extend the functionality of a machine (e.g.
add-on card, modem, or extra memory capability). These LOCALIZED FEATURES will NOT be covered
in this generic service guide. In such cases, please contact your regional offices or the responsible
personnel/channel to provide you with further technical details.

2.

Please note WHEN ORDERING FRU PARTS, that you should check the most up-to-date information
available on your regional web or channel. If, for whatever reason, a part number change is made, it will
not be noted in the printed Service Guide. For ACER-AUTHORIZED SERVICE PROVIDERS, your Acer
office may have a DIFFERENT part number code to those given in the FRU list of this printed Service
Guide. You MUST use the list provided by your regional Acer office to order FRU parts for repair and
service of customer machines.

«
...
3
4
5
6
7
...
»

Summary of Contents for TravelMate 4730 Series



































































































































































































Reviews:

No comments

Related manuals for TravelMate 4730 Series

Brand: UNYKAch Pages: 2

TravelMate 620 Series

Brand: Acer Pages: 92

TravelMate 630 series

Brand: Acer Pages: 100

TravelMate 8481

Brand: Acer Pages: 76

AMILO Pro V2040

Brand: Fujitsu Pages: 38

Brand: Fujitsu Pages: 85

Brand: Fujitsu Pages: 89

A1130 - Lifebook T6500 4GB 500GB

Brand: Fujitsu Pages: 2

Brand: Fujitsu Pages: 6

Brand: Fujitsu Pages: 84

Brand: Fujitsu Pages: 6

AMILO Pa 2510-25P

Brand: Fujitsu Pages: 2

Brand: Fujitsu Pages: 6

Brand: Fujitsu Pages: 3

AMILO Pro V3205

Brand: Fujitsu Pages: 3

Brand: Fujitsu Pages: 106

Brand: Fujitsu Pages: 99

Brand: Fujitsu Pages: 57

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands