manualshive.com logo in svg

Acer TravelMate 4730 Series, Service Manual

Share
Download
Acer TravelMate 4730 Series Service Manual Download Page 47

Chapter 2

37

BIOS Flash Utility

The BIOS flash memory update is required for the following conditions:

•

New versions of system programs

•

New features or options

•

Restore a BIOS when it becomes corrupted. 

Use the Phlash utility to update the system BIOS flash ROM.

NOTE: 

Create a 

Crisis Recovery Media

 (such as USB HDD) before you use the Phlash utility.

NOTE: 

Do not install memory-related drivers (XMS, EMS, DPMI) when you use the Phlash.

NOTE: 

Please use the AC adaptor power supply when you run the Phlash utility. If the battery pack does not 

contain enough power to finish BIOS flash, the system will not boot as the BIOS is not loaded. 

Perform the following steps to use the Flash Utility:

1.

Press F2 during boot to enter the Setup Menu.

2.

Select 

Boot Menu

 to modify the boot priority order, for example, if using USB HDD to Update BIOS, move 

USB HDD to position 1.

3.

Execute the 

IFLASH.BAT

 batch file to update BIOS (Read xxxxx.fd to Memory).

Summary of Contents for TravelMate 4730 Series



































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands