6
2.6 Focus
2.6.1
区
Pattern
(1) If pattern can be uniformly focused (not worse than
Limit Sample), then pass!
(2) If it’s difficult to judge, then check 2.6.2
2.6.2 Defocus and Flare
Defocus: R<=3.0; G<=3.0; B<=3.0 pixel
Flare: R<=3.5; G<=3.5; B<=3.5 pixel
Slight flare is not counted as flare.
2.6.3 Focus unbalance
Adjust focus from near to far until one corner clear,
difference less than 50 cm
Center of
49”diagonal area
All other area
R-G
<2/3
<1
G-B
<2/3
<1
2.7 Lateral Color
R-B
<1
<1
2.8 Image Quality
2.8.1 DMD Image Quality
2.8.2 Image Imperfection
2.9 Lamp Type
Philips UHP 210-160W 0.9 E20.9 AC Lamp
3.0 Mechanical Specification
3.1 Dimensions
290 x98.5x 254 mm (W x H x D)
3.2 Weight
<3500g
3.3 Security Slot
Kensington compatible slot 36kgf break away force
3.5 Lens Cover
Detached lens cover
3.6 Feet
Fast adjustable foot in front, Adjustable foot in rear.
Front/ Rear foot Tilt:0-6
,Right/Left: ±2.2
∘
∘
4.0 Packaging
Detail refer to Packing Description
4.1 Outside Dimensions
375 x 216 x 370 mm (W x H x D)
4.2 Weight
<5.5 kg (Including Accessories, Projector)
4.3 Transportation
30 EA by Air;
1500 EA @ 40’ container, or750 EA @ 20’ container by
Sea
5.0 Thermal Specification
Mechanical component temperature at ambience
0~35
℃
5.1 Surface held or touched
for short periods
Metal < 65
°
C; Plastic<85
°
C
Metal
Plastic
5.2 Surface which may be
touched
<65
°
C
<85
°
C
5.3 Exhaust Air
<95
°
C
6.0 Environmental
Adhere to Appendix B
Operating 0~35
°
C, without condensation
6.1 Temperature
Storage
-30~65°C, without condensation
Operating 10~90%RH, without condensation
6.2 Humidity
Storage
10~90%RH, without condensation
Typical
Normal mode: 36dBA @ 23±2°C, CW x2
speed
Eco mode: 31dBA @ 23±2°C, CW x2 speed
Normal mode: 38dBA @ 23±2°C, CW x3
speed
Eco mode: 33dBA @ 23±2°C, CW x3 speed
6.3 Audible Noise Level
Maximum
Normal mode: 38dBA @ 23±2°C, CW x2
speed
Summary of Contents for S5201M Series
