Acer S5201M Series, Service Manual, Page: 39 / 105

39
4
(4) Disassemble the
screw*3(M3*L6) connecting the
F/C with the RF board
(TRANSFER BD).(Figure5).
screw
driver
5
(1) Disassemble the screws*6
(STAND OFF XH4#-40*6L) and
then take off the R/C.(Figure1).
(2) Disassemble the screws*5
(M3*L6) and loose the wires
connecting the engine and the
main board, and then take off the
SHD of the main board(Figure2).
screw
driver
6
(1) Extract all the wires in the
main board and loose the wire in
clips.(Figure1)
(2) Take off the ourlet case and
the Fans*2.
screw
driver
3
4
5
2
1
Figure2
loose these wires
Figure1
Figure5
RF BD
Note: Circuit boards > 10cm
2
has been highlighted with the yellow
rectangle as above image shows. Please detach the Circuit boards
and follow local regulations for disposal.
CW 3pin wire
CW wire
ballast 5pin
wire
speaker wire
IR wire
inlet fan
wire
Figure1
blower wire
twins fan wire
outlet speaker wire
RF BD wire
7
(3) Take off the main board.
Attention: DON'T TWIST THE
PIN UNDER THE MB.
Main BD
Note: Circuit boards > 10cm
2
has been highlighted with the yellow
rectangle as above image shows. Please detach the Circuit boards
and follow local regulations for disposal.