![Acer S511P Service Manual Download Page 32](http://html.mh-extra.com/html/acer/s511p/s511p_service-manual_6248032.webp)
26
Chapter 2
Disk Drives
Select Disk Drives from the main menu to configure the drives installed in your system.
The following screen shows the Disk Drives menu:
NOTE:
The asterisk (*) mark indicates that the parameter appears only when you are in the Advanced Level.
The following table describes the parameters found in this menu.
Parameter
Description
Options
Diskette Drive A / B
Allows you to configure your floppy drive
None
360 KB, 5.25-inch
1.2 MB, 5.25-inch
720 KB, 3.5-inch
1.44 MB, 3.5-inch
2.88 MB, 3.5-inch
IDE Primary Channel Master
Lets you configure the hard disk drive
connected to the master port of IDE channel
1.
IDE Primary Channel Slave
Lets you configure the hard disk drive
connected to the slave port of IDE channel 1.
IDE Secondary Channel Master
Lets you configure the hard disk drive
connected to the master port of IDE channel
2.
IDE Secondary Channel Slave
Lets you configure the hard disk drive
connected to the slave port of IDE channel 2.
Disk Drives
Diskette Drive A .................[1.44 MB 3.5-inch]
Diskette Drive B .................[None]
!
IDE Primary Channel Master
!
IDE Primary Channel Slave
!
IDE Secondary Channel Master
!
IDE Secondary Channel Slave
Summary of Contents for S511P
