Chapter 2
23
System Information
The following screen appears if you select System Information from the main menu.
This page shows the current basic configuration of your system.
The following table describes the parameters found in the System Information pages:
Parameter
Description
Format
Processor
Specifies the type of processor currently installed
in your system.
Processor Speed
Specifies the speed of the processor currently
installed in your system.
Level 1 Cache
Specifies the first-level or the internal memory
(i.e., the memory integrated into the processor)
size, and whether it is enabled or disabled.
Cache size in KB
Level 2 Cache
Specifies the second-level cache memory size
currently supported by the system.
Cache size in KB
Diskette Drive A
Shows the diskette drive A type.
Capacity, dimension
Diskette Drive B
Shows the diskette drive B type.
Capacity, dimension
IDE Primary Channel Master Specifies the current configuration of the IDE
device connected to the master port of the primary
IDE channel.
Drive type, capacity
IDE Primary Channel Slave
Specifies the current configuration of the IDE
device connected to the slave port of the primary
IDE channel.
Drive type, capacity
System Information
Processor ........................... Pentium III
Processor Speed ..................... 500 MHz
Level 1 Cache ....................... 32 KB, Enabled
Level 2 Cache ....................... 256 KB, Enabled
Diskette Drive A .................... 1.44 MB 3.5-inch
Diskette Drive B .................... None
IDE Primary Channel Master .......... HardDisk,4311 M.B.
IDE Primary Channel Slave ........... None
IDE Secondary Channel Master ........ None
IDE Secondary Channel Slave ......... IDE CD-ROM
Total Memory ........................ 128 MB
1st Bank........................... SDRAM, 64 MB
2nd Bank........................... SDRAM, 64 MB
Serial Port ........................ 3F8h, IRQ 4
Parallel Port ....................... 378h, IRQ 7
PS/2 Mouse .......................... Installed
Summary of Contents for S511P
