
28
Chapter 2
Security
The Security screen contains parameters that help safeguard and protect your computer from unauthorized
use.
NOTE:
System BIOS does not support Trusted Platform Module (TPM).
The table below describes the parameters in this screen. Settings in
boldface
are the default and suggested
parameter settings.
NOTE:
When prompted to enter a password, you have three tries before the system halts. If you forget your
password, you may have to return your notebook computer to your dealer to reset it.
Parameter
Description
Option
Supervisor Password Is
Shows the setting of the supervisor password
Clear
User Password Is
Shows the setting of the user password.
Clear
SATA Port 0 Disk Status
Shows the setting of the SATA Port Disk Status
Frozen
Set Supervisor Password
Press Enter to set the supervisor password. When
supervisor password is set, the BIOS Setup Utility is
protected from unauthorized access. The user can not
either enter the Setup menu nor change the value of
parameters.
N/A
Set User Password
Press Enter to set the user password. When user
password is set, this password protects the BIOS Setup
Utility from unauthorized access. The user can enter
Setup menu only and does not have right to change the
value of parameters except for the date and time.
N/A
Set SATA Port 0 HDD
Password
Enter SATA Port 0 HDD Password.
N/A
Power on Password
Defines whether a power on password is required.
When the system is first turned on it will prompt for a
password. Without a password the computer will not
continue to boot.
Disabled
or
Enabled
I t e m S p e c i f i c H e l p
I n s t a l l o r C h a n g e t h e
p a s s w o r d a n d t h e l e n g t h
o f p a s s w o r d m u s t b e
g r e a t e r t h a n o n e w o r d .
F 1
E S C
H e l p
E x i t
S e l e c t I t e m
S e l e c t M e n u
C h a n g e Va l u e s
S e l e c t
S u b M e n u
E n t e r
F 9
F 1 0
S e t u p D e f a u l t
S a v e a n d E x i t
C l e a r
C l e a r
F r o z e n
[ D i s a b l e d ]
C l e a r
C l e a r
F r o z e n
[ D i s a b l e d ]
S u p e r v i s o r P a s s w o r d I s
U s e r P a s s w o r d I s
S A T A P o r t 0 D i s k S t a t u s
S e t S u p e r v i s o r P a s s w o r d
S e t U s e r P a s s w o r d
S e t S A T A P o r t 0 H D D P a s s w o r d
P o w e r o n P a s s w o r d
S u p e r v i s o r P a s s w o r d I s
U s e r P a s s w o r d I s
S A T A P o r t 0 D i s k S t a t u s
S e t S u p e r v i s o r P a s s w o r d
S e t U s e r P a s s w o r d
S e t S A T A P o r t 0 H D D P a s s w o r d
P o w e r o n P a s s w o r d
F 5 / F 6
I n s y d e H 2 0 S e t u p U t i l i t y R e v . 3 . 5
Information
Main
Boot
Exit
Security
Summary of Contents for LX.PWJ02.001
