manualshive.com logo in svg

Acer LX.PWJ02.001, Service Manual, Page: 35 / 210

Share
Download
Acer LX.PWJ02.001 Service Manual Download Page 35

Chapter 2

25

System Utilities

BIOS Setup Utility

The BIOS Setup Utility is a hardware configuration program built into your computer’s BIOS (Basic Input/
Output System).

Your computer is already properly configured and optimized, and you do not need to run this utility. However, if 
you encounter configuration problems, you may need to run Setup. Please also refer to Chapter 4 
Troubleshooting when problem arises.

To activate the BIOS Utility, press 

F2

 during POST (when “Press <F2> to enter Setup” message is prompted 

on the bottom of screen).

The default parameter of F12 Boot Menu is set to “disabled”. If you want to change boot device without 
entering BIOS Setup Utility, please set the parameter to “enabled”. 

Press <F12> during POST to enter multi-boot menu. In this menu, user can change boot device without 
entering BIOS SETUP Utility.

Navigating the BIOS Utility

There are five menu options: Information, Main, Security, Boot, and Exit.

Follow these instructions:

•

To choose a menu, use the left and right arrow keys.

•

To choose an item, use the up and down arrow keys.

•

To change the value of a parameter, press 

F5

 or 

F6

.

•

Press 

Esc

 to be prompted to exit the BIOS utility.

•

In any menu, you can load default settings by pressing 

F9

. You can also press 

F10

 to save any 

changes made and exit the BIOS Setup Utility.

NOTE: 

You can change the value of a parameter if it is enclosed in square brackets. Navigation keys for a 

particular menu are shown on the bottom of the screen. Help for parameters are found in the Item 
Specific Help part of the screen. Read this carefully when making changes to parameter values. 

Please 

note that system information is subject to different models

.

Chapter 2

Summary of Contents for LX.PWJ02.001



















































































































































































































Reviews:

No comments