Acer AW170h F1 User Manual Download

Page: 154 / 160

Appendix C: Acer Smart Console

138

Preferences submenu: Click this item to access the Preferences
submenu.

Full-screen Mode: Click this item to change the display window to the
full-screen.

Exit Remote Console: Click on this item to exit from the remote
connection.

User List: Click on this item to display the user list.

Change Tool Bar Display: Click this item to change the tool bar display
format.

Hotplug Keyboard/Mouse: Click this item to use hotplug keyboard and
mouse.

Macro: Click this item to enable Macro support and use the Macro
settings features.

Video Recording: Click this item to access the Video Recording
submenu and to use video recording.

Video Playback: Click this item for video playback.

Hotplug Keyboard/Mouse

Hotplug Keyboard/Mouse: Click the item enable keyboard/mouse
hotplug support for your console redirection.

User List

This feature allows you to access the user list.

Session ID: This item displays the current session ID#.

User Name: This item displays the name(s) of the user(s).

IP Address: This item displays the IP Address of the host server.

Capture

This feature allows you to capture the screen display on your remote
console.

Full Screen Capture: Click this item to capture the full screen video
display.

Summary of Contents for AW170h F1
































































































































































Search results

Summary of Contents for AW170h F1

Reviews:

Related manuals for AW170h F1

Brands by name

Popular brands

Acer AW170h F1, User Manual

Search results

Summary of Contents for AW170h F1

Reviews:

Related manuals for AW170h F1

Brands by name

Popular brands