Acer AW170h F1 User Manual Download Page 111

Page: 111 / 160

RAID configuration utilities

Intel onboard SATA RAID Creation

Configuring Intel onboard SATA RAID

This section briefly shows how to create RAID volume with Intel
onboard SATA RAID.

To enable the Intel onboard SATA RAID controller

Turn on the server and the display monitor. If the server is already
turned on, please close all open applications and then restart the
server.

During POST, press <F2> to access the BIOS Setup Utility.

Select the Advanced > IDE/SATA Configuration submenu.

Change the setting of the Configure SATA#1 as field from IDE to
RAID.

Select Intel of ICH Raid CodeBase option.

Press <F10>.

Select Ok to save the setting and close the Setup Utility.

Entering Intel onboard SATA RAID Configuration Utility

To start Intel onboard SATA RAID Configuration Utility, press <CTRL> +
<I> when you see the RAID BIOS during POST. After POST finished, the
Intel (R) Matrix Storage Manager option ROM will display on the
screen.

Creating RAID Volume

Select Create RAID Volume.

The screen displays the CREATE VOLUME MENU.

Type in the name of the RAID volume.

Select RAID level.

Select desired HDD to create the RAID.

Select Create Volume.

Press Y when prompted by "Are you sure you want to create the
volume? (Y/N):".

Summary of Contents for AW170h F1
































































































































































Search results

Summary of Contents for AW170h F1

Reviews:

Related manuals for AW170h F1

Brands by name

Popular brands

Acer AW170h F1, User Manual

Search results

Summary of Contents for AW170h F1

Reviews:

Related manuals for AW170h F1

Brands by name

Popular brands