Acer AT350 F1 Series, User Manual

Page: 110 / 184

4 System BIOS 98
Console Redirection
Parameter Description Options
Console
Redirection Select Enabled to use Console
Redirection for remote access. If Remote
Access is set to Enabled, the following
items will display. Enabled
Disabled
Serial Port
Number
This feature allows the user to decide
which serial port to be used for Console
Redirection. COM1
COM2
Base
Address,
IRQ
This item displays the base address and
IRQ of the serial port used for Console
Redirection. The default setting is 2F8h,
3.
Serial Port
Mode This feature allows the user to set the
serial port mode for Console Redirection. 115200 8, n 1
57600 8, n, 1
38400 8, n, 1
9200 8, n, 1
9600 8, n, 1
Flow
Control This feature allows the user to set the
flow control for Console Redirection. None
Hardware
Software
Redirection
After BIOS
POST Select Disabled to turn off Console
Redirection after Power-On Self-Test
(POST). Select Always to keep Console
Redirection active all the time after
POST. (Note: This setting may not be
supported by some operating systems.)
Select Boot Loader to keep Console
Redirection active during POST and Boot
up. Disabled
Boot Loader
Always
Terminal
Type This feature allows the user to select the
target terminal type for Console
Redirection. ANSI
VT100
VT-UTF8
VT-UTF8
Combo Key
Support Select Enabled to enable VT-UTF8
Combination Key support for ANSI/
VT100 terminals. Enabled
Disabled