29
Memory Installation / Removal
The motherboard supports DDR3 memory modules, whereby BIOS will automatically detect memory
capacity and specifications. Memory modules are designed so that they can be inserted only in one
direction. The memory capacity used can differ with each slot.
Installation step:
1.
Insert the DIMM memory module vertically into the DIMM slot, and push it down.
2.
Close the plastic clip at both edges of the DIMM slots to lock the DIMM module.
NOTE!
DIMM must be populated in order starting from DIMMA1/B1 socket. For dual-channel
operation, DIMMs must be installed in matched pairs.
3.
Reverse the installation steps when you wish to remove the DIMM module.
Memory Suggest Population Table:
Summary of Contents for AT115 F1
Page 1: ...Gateway GT115 Service Guide PART NO PRINTED IN TAIWAN ...
Page 12: ...8 Main Board MB R7F0A 001 FSP FSP450 60EP 450W POWER SUPPLY PY 45008 001 Mylar 47 R7F0L 001 ...
Page 20: ...16 Appearance of System Front view Item Component 1 USB connectors 2 LED indicator panel ...
Page 66: ...62 Figure 300 03 ...
