background image

10 

System Specifications 

 
 

Hardware specification 

System unit 

 

Item Description 

Processor socket 

AMD socket C32 

Processor support 

  Memory Technology – Socket C32 interfaces to DDR3 SDRAM 

DIMMs. 

 HyperTransport™ 

Technology. 

  Thermal Monitoring and Control – The Socket C32 processor uses 

Advanced Platform Management Link.   

Core logic chipsets 

  AMD SR5670 – North bridge 

  AMD SP5100 – South bridge   

LAN controller 

INTEL 82574L 

Memory controller 

Integrated in AMD socket C32 processor. 

Storage controller 

Software RAID – Integrated in AMD SP5100. 

VGA controller 

XGI Volari – Z9S with 64 MB VRAM. 

I/O subsystem 

  PCI-E 1 – PCI Express x16 line with x16 slot. 

  PCI-E 2 – PCI Express x8 line with x8 slot. 

  PCI-E 3 – PCI Express x4 line with x4 slot. 

  PCI-E 4 – PCI Express x1 line with x4 slot. 

Memory 

  Four DDR3 (1066/1333 MHz ) slots. 

  Support maximum 64GB at 800MHz. 

I/O ports 

  Front panel – Two USB ports. 

  Rear panel – PS/2 keyboard port, PS/2 mouse port, COM port, Four 

USB ports, Video Port, Audio jack (Option), LAN port. 

  Internal – Two USB ports for tape device, USB port, I2C Connector, 

TPM, Six SATA ports. 

Status LED indicators 

  Front panel – Power, Hard drive, System Status and LAN activity. 

  Rear panel – Activity and link status for the LAN ports. 

Thermal solution 

  One system fan. 

  One processor heat sink fan. 

  One front panel fan. 

 
 

Summary of Contents for AT115 F1








































































Reviews: