manualshive.com logo in svg

Acer Aspire S7-391, Service Manual, Page: 44 / 186

Share
Download
Acer Aspire S7-391 Service Manual Download Page 44

2-6

System Utilities

Main

0

Use this tab to set the system time and date, enable or disable boot options, and enable or 
disable the D2D recovery feature.

Figure 2-2.

BIOS Main

Table 2-2.

BIOS Main 

Parameter

Description

Format/Option

System Time

System time expressed in 24-hour format.

Format: HH:MM:SS 
(hour:minute:second) 

System Date

System date.

Format: MM/DD/YYYY 
(month/day/year)

Total Memory

Total system memory available.

–

Video Memory

System memory allocated for graphics 
processing.

–

Network Boot

Option to boot system from LAN.

Enabled or Disabled

F12 Boot Menu

Option to enter the 

Boot

 menu during POST.

Enabled or Disabled

SATA Mode

Option to set the SATA controller mode.

RAID or AHCI

xHCI Support

Option to set eXtensible Host Controller 
Interface.

Enabled or Disabled

Function Key 
Behavior

Option to set the Function Key behavior.

Special Keys or 
Function Keys

Summary of Contents for Aspire S7-391



























































































































































































Reviews:

No comments