manualshive.com logo in svg

Acer Aspire S7-391, Service Manual, Page: 185 / 186

Share
Download
Acer Aspire S7-391 Service Manual Download Page 185

8-3

Online Support Information

0

This section describes online technical support services available to help users repair their 
Acer Systems.

For distributors, dealers, ASP or TPM, please refer the technical queries to a local Acer 
branch office. Acer Branch Offices and Regional Business Units may access our website. 
However some information sources will require a user i.d. and password. These can be 
obtained directly from Acer CSD Taiwan.

Acer's Website offers convenient and valuable support resources.

In the Technical Information section users can download information on all of Acer's 
Notebook, Desktop and Server models including:



Service guides for all models



Bios updates



Software utilities



Spare parts lists



TABs (Technical Announcement Bulletin)

For these purposes, we have included an Acrobat File to facilitate the problem-free 
downloading of our technical material.

Also contained on this website are:



Detailed information on Acer's International Traveller’s Warranty (ITW)



Returned material authorization procedures



An overview of all the support services we offer, accompanied by a list of telephone, fax 

and email contacts for all technical queries.

We are always looking for ways to optimize and improve our services, so do not hesitate to 
direct any suggestions or comments to us.

Summary of Contents for Aspire S7-391



























































































































































































Reviews:

No comments