manualshive.com logo in svg

Acer Aspire S7-391, Service Manual, Page: 4 / 186

Share
Download
Acer Aspire S7-391 Service Manual Download Page 4

iv

General information

0

Before using this information and the product it supports, read the following general 
information.

This service guide provides you with all technical information relating to the basic 
configuration for Acer’s global product offering. To better fit local market requirements and 
enhance product competitiveness, your regional office may have decided to extend the 
functionality of a machine (such as add-on cards, modems, or extra memory capabilities). 
These localized features are not covered in this generic service guide. In such cases, contact 
your regional office or the responsible personnel/channel to provide you with further technical 
details.

When ordering FRU parts: Check the most up-to-date information available on your regional 
Web or channel. If, for whatever reason, a part number change is made, it may not be noted 
in this printed service guide.

Acer-authorized Service Providers:

 

Your Acer office may have a different part number code 

than those given in the FRU list in this service guide. You must use the list provided by your 
regional Acer office to order FRU parts for repair and service of customer machines.

Summary of Contents for Aspire S7-391



























































































































































































Reviews:

No comments