Acer Aspire 5560 Service Manual Download Page 178

Page: 178 / 240

4-12

Troubleshooting

6. Navigate to Start



Control Panel



Hardware and Sound



Sound. Confirm that

Speakers are selected as the default audio device (green check mark).

NOTE:

NOTE

If Speakers do not show, right-click on the

Playback

tab and select

Show Disabled

Devices

(clear by default).

7. Select Speakers and click Configure to start

Speaker Setup

. Follow the on-screen

prompts to configure the speakers.

8. Remove any recently installed hardware or software.
9. Restore system and file settings from a known good date using

System Restore

10. If the issue is remains, repeat step 9, selecting an earlier time and date.
11. Reinstall the Operating System.
12. If the issue is still not resolved, refer to the

Online Support Information

on page

9-3

Summary of Contents for Aspire 5560

















































































































































































































































Search results

Summary of Contents for Aspire 5560

Reviews:

Related manuals for Aspire 5560

Brands by name

Popular brands

Acer Aspire 5560, Service Manual

Search results

Summary of Contents for Aspire 5560

Reviews:

Related manuals for Aspire 5560

Brands by name

Popular brands