Acer Aspire 5560 Service Manual Download Page 63

Page: 63 / 240

System Utilities

2-11

BIOS Flash Utilities

BIOS Flash memory updates are required for the following conditions:



New versions of system programs



New features or options



Restore a BIOS when it becomes corrupted.

Use the Flash utility to update the system BIOS Flash ROM.

NOTE:

NOTE

If a Crisis Recovery Disc is not available, create one before Flash utility is used.

NOTE:

NOTE

Do not install memory related drivers (XMS, EMS, DPMI) when Flash is used.

NOTE:

NOTE

Use AC adaptor power supply when running Flash utility. If battery pack does

not contain power to finish loading BIOS Flash, do not boot system.

Perform the following to run Flash.

1. Rename the BIOS file as “XXXXXXX.FD”.
2. Copy the “XXXXXXX.FD” file to a bootable USB device containing the Crisis Recovery

disk files.

3. Turn off the computer.
4. Insert the USB device containing the renamed BIOS file and the Crisis Recovery disk files

to any USB port.

5. Press and hold the

Esc

keys (this is the BIOS recovery hotkey), then press the

power button.

6. Release the

Esc

keys after POST.

NOTE:

NOTE

Flash utility has auto execution function.

Summary of Contents for Aspire 5560

















































































































































































































































Search results

Summary of Contents for Aspire 5560

Reviews:

Related manuals for Aspire 5560

Brands by name

Popular brands

Acer Aspire 5560, Service Manual

Search results

Summary of Contents for Aspire 5560

Reviews:

Related manuals for Aspire 5560

Brands by name

Popular brands