Acer ARMC_2 User Manual Download Page 92

Page: 92 / 153

Users

The

Users

screen is a subsection of the

Configure

group. This page allows you to

configure the administrators who have access to the ARMC/2.

The following table describes the information listed in this subsection in detail:

Item Description
Username

This field displays a list of all users who are able to access this ARMC/2.

Note:

The default administrator is

root

. It is prudent for you to change the

root

password.

Description

This field displays the Username’s description that you entered when you created the
account for each Username in the list.

Add Button

This button allows you to add and configure a new user account to your ARMC/2.

Remove Button

This button allows you to eliminate an account from your ARMC/2’s access list.

Properties Button

This button allows you to view and edit an account.

Close Button

This button allows you to exit the User dialog box.

Cont’d

ARMC/2 User’s Guide

Summary of Contents for ARMC_2


























































































































































Search results

Summary of Contents for ARMC_2

Reviews:

Related manuals for ARMC_2

Brands by name

Popular brands

Acer ARMC_2, User Manual

Search results

Summary of Contents for ARMC_2

Reviews:

Related manuals for ARMC_2

Brands by name

Popular brands