Acer ARMC_2 User Manual Download

Page: 47 / 153

Chapter 4

Using Your ARMC/2

ARMC/2 GUI Overview

The ARMC/2 has a user-friendly Graphics User Interface (GUI) called the

ARMC/2 GUI

It is designed to be easy to use. It has a low learning curve because it uses a standard
Internet browser. You can expect to be up and running in less than five minutes.

This chapter allows you to become familiar with the

ARMC/2 GUI

’s various functions.

Each function is described in detail.

Default User Name and Password

When you first try to access your ARMC/2, you will be prompted to enter a user name
and password. The default user name and password are as follows:

Field Default
User Name

root

Password

superuser

Note:

The default user name and password are in lower-case characters.

Note:

When you log in using the

root

user name and password, you have full administrative powers. It

is advised that once you log in, you change the

root

password.

Chapter Four : Using Your ARMC/2

Summary of Contents for ARMC_2


























































































































































Search results

Summary of Contents for ARMC_2

Reviews:

Related manuals for ARMC_2

Brands by name

Popular brands

Acer ARMC_2, User Manual

Search results

Summary of Contents for ARMC_2

Reviews:

Related manuals for ARMC_2

Brands by name

Popular brands