Acer ARMC_2, User Manual

Page: 135 / 153

ARMC/2 Card Remote Recovery Application (RRA),
Continued
Step Description
The Card Settings screen appears.
The Card Setting fields are explained in the table below:
Field/ Button
Description
Select Card
Number
dropdown box The ARMC/2 Remote Recovery Application (RRA) automatically assigns a card
number to the ARMC/2 card that it locates in Recovery Mode. This is helpful
when you are trying to flash more than one ARMC/2 card. Think of the Select
Card Number dropdown box as a shortcut to other ARMC/2 cards that are in
Recovery Mode.
MAC Address This field allows you to specify the ARMC/2 card’s MAC Address.
Note:
New settings are stored in the Windows registry automatically.
Note: When you specify the
ARMC/2
card, it is advisable to set the MAC
address back to the one indicated on the sticker physically located on the
back of the
ARMC/2
card’s PCB.
IP Address This field allows you to specify your ARMC/2 card’s IP address. The IP
address you assign is only valid during Recovery Mode.
Netmask This field allows you to specify your ARMC/2 card’s network mask. The
network mask you assign is only valid during Recovery Mode.
Gateway This field allows you to specify your ARMC/2 card’s gateway or router
address. The gateway address you assign is only valid during Recovery Mode.
Cancel Button The Cancel button allows you to cancel any new settings that are not saved.
2
OK Button The Ok button allows you to save any new settings that you have made and
continue with the flashing function.
Cont’d
Appendix D : Troubleshooting 127