manualshive.com logo in svg

Acer ARMC_2, User Manual

Share
Download
Acer ARMC_2 User Manual Download Page 2

© Copyright 1998-2004 American Megatrends, Inc. 
All rights reserved.  
American Megatrends, Inc. 
6145-F Northbelt Parkway 
Norcross, GA 30071 
 

This publication contains proprietary information which is protected by copyright. No 
part of this publication can be reproduced, transcribed, stored in a retrieval system, 
translated into any language or computer language, or transmitted in any form 
whatsoever without the prior written consent of the publisher, American Megatrends, Inc. 
American Megatrends, Inc. acknowledges the following trademarks: 

 

Intel is a registered trademark of the Intel Corporation. 
MS-DOS and Microsoft are registered trademarks of the Microsoft Corporation. 
Microsoft Windows is a trademark of the Microsoft Corporation. 
IBM, AT, VGA, PS/2, and OS/2 are registered trademarks and XT and CGA are 
trademarks of the International Business Machines Corporation.  

 

Other trademarks and trade names may be used in this document to refer to either the 
entities claiming the marks and names or their products. American Megatrends, Inc. 
disclaims any proprietary interest in trademarks and trade names other than its own. 

 

 

Revision History 

 
02/25/04  

Preliminary  release 

03/15/04  

Updated  GUI 

04/02/04  

Updated ARMC2RMseek Utility instructions 

05/04/04  

Password/User Name length changed to max 32 characters 

05/14/04  

Added Full Screen Toolbar & ARMC2ConfigApp FW Flash Module 

06/04/04  

Removed Battery Backup Unit Information 

07/09/04  

Removed Optional Modem Information 

 

ARMC/2 User’s Guide 

ii 

Summary of Contents for ARMC_2


























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands