129
Assert NMI
on SERR
Disabled
Enabled
If enabled, NMI is gener-
ated on SERR and logged.
Assert NMI
on PERR
Disabled
Enabled
If enabled, NMI is gener-
ated. SERR option needs
to be enabled to activate
this option.
Grayed out if
“NMI on SERR” is
disabled.
Resume on
AC Power
Loss
Stays Off
Power On
Last State
Determines the mode of
operation if a power loss
occurs. Stays off, the sys-
tem will remain off once
power is restored. Power
On, boots the system after
power is restored.
“Last State” is
only displayed if
the Intel Man-
agement Mod-
ule is present.
When displayed,
“Last State” is
the default.
When set to
“Stays Off,”
“Power Switch
Inhibit” is dis-
abled.
FRB-2 Policy
Disable BSP
Do not dis-
able BSP
Retry on
Next Boot
Disable
FRB2 Timer
This controls action if the
boot processor will be dis-
abled or not.
“Disable BSP”
and “Do not dis-
able BSP” are
only displayed if
the Intel Man-
agement Mod-
ule is present.
Late POST
Timeout
Disabled
5 minutes
10 minutes
15 minutes
20 minutes
This controls the time limit
for add-in card detection.
The system is reset on tim-
eout.
Hard Disk
OS Boot
Timeout
Disabled
5 minutes
10 minutes
15 minutes
20 minutes
This controls the time limit
allowed for booting an
operating system from a
Hard disk drive. The action
taken on timeout is deter-
mined by the OS Watch-
dog Timer policy setting.
Feature
Options
Help Text
Description
Summary of Contents for Altos R510
