Acer Altos G520 series, User Manual

Page: 40 / 186

2 System setup 30
Operating system configuration
The Acer Altos G520 series server comes with Acer EasyBUILD
TM
that
allows you to conveniently install your choice of operating system. To
start using EasyBUILD, follow the steps below.
1 Locate the EasyBUILD System CD included in the system package.
2 With your system powered on, gently press the optical drive Stop/
Eject button.
3 When the disc tray slides open, insert the EasyBUILD System CD
with the label or title side of the disc facing upward.
Note: When handling the disc, hold it by the edges to avoid
smudges or fingerprints.
4 Gently press the disc down to make sure that it is properly
inserted.
Caution! While pressing the disc, be careful not to bend the disc
tray. Make sure that the disc is properly inserted before closing
the disc tray. Improper insertion may damage both the disc and
the optical drive.
5 Gently press the drive Stop/Eject button again to close the disc
tray.
6 The Acer EasyBUILD sequence begins automatically. Follow all
onscreen instructions.
For more information, refer to the EasyBUILD
TM
Installation guide.
BB!H631!.!FO/cppl!!Qbhf!41!!Uvftebz-!Bvhvtu!28-!3115!!5;13!QN