System Housing
3
2.2
Preparing the Housing Unit
Do the following to begin setting up the system:
1.
Unlock the front wheels and move the system to your desired site.
The system housing design allows for easy transport in spite of its size.
It comes with four wheels that facilitate short-distance transits. The two
front wheels each include a lever to lock the wheels after you have
positioned the system into place.
2.
After moving, lock the wheels by pressing down the levers.
Make sure to unlock the wheels when you want to
move the system again.
Unlock
Lock
Front Wheel Lever
Summary of Contents for Altos 11000 System
