BIOS Utility
3-47
Power-on Password
The Power-on Password secures your system against unauthorized
use. Once you set this password, you have to type it whenever you
boot the system. To set this password, enter the BIOS utility, select
System Security, then highlight the Power-on Password parameter.
Follow the same procedure as in setting the Setup password.
Make sure you set JP3 to pins 1-2 to enable
the Power-on password.
Operation Mode
This function lets you enable or disable the password prompt display.
When set to
Normal
, the password prompt appears before system
boot. When set to
Network
, the password prompt does not appear;
however, your system will not respond to any keyboard or mouse
input until you enter the correct password.
3.9
Summary of Contents for Altos 11000 System
