53
Power Management Setup
The table below describes the parameters found in this menu.
Settings in
boldface
are the default and suggested settings.
Parameter
Description
Options
Power
Management
This function allows you to set the
default parameters for power-saving
modes. Set it to
Disable
to turn off
the power management function. Set
it to
User Define
to choose your own
parameters. See the Power
Management Mode Table on page 57.
User Define
Max Saving
Mix Saving
Disabled
PM Control by
APM
If "Max Saving" in the Power
Management parameter is selected,
you can turn on this item, transfer
power management control to APM
(Advanced Power Management) and
enhance the power saving function.
For example, you can stop the CPU
internal clock.
Yes
No
Ap4400-e.book Page 53 Friday, October 1, 1999 2:09 PM
Summary of Contents for AcerPower 4400
