Acer AcerPower 4400, User Manual

Page: 55 / 100

45
Boot Sequence This parameter allows you to
specify the system boot up
search sequence. The hard
disk IDs are listed below:
C: Primary master
D: Primary slave
E: Secondary master
F: Secondary slave
LS: LS120
Zip: IOMEGA ZIP Drive
C,A,CDROM
A,C,SCSI
C,A,SCSI
C,CDROM,A
CDROM,C,A
CDROM,A,C
D,A,SCSI
E,A,SCSI
SCSI,A,C
SCSI,C,A
C only
LS/ZIP,C
Silent Boot This item is used to decide if
the Aspire logo displays when
the system boots up. Enabled
Disabled
Display
Configuration Data This item is used to decide if
the configuration table
displays when the system
boots up. Enabled
Disabled
Swap Floppy Drive This item allows you to swap
floppy drives. For example, if
you have two floppy drives (A
and B), you can assign the
first drive as drive B and the
second drive as drive A or
vice-versa. Disabled
Enabled
Boot Up Floppy Seek When enabled, the BIOS
issues the seek command to
the floppy drive during POST
to move the floppy drive head
forward and backward. Enabled
Disabled
Parameter
Description Format/Options
Ap4400-e.book Page 45 Friday, October 1, 1999 2:09 PM