49
Chipset Features Setup
Caution:
Make sure you fully understand the items contained in this menu
before you try to change anything. You may change the parameter settings
to improve system performance. However, changing these parameters
could make your system unstable if the setting is not correct for your
system configuration.
The table below describes the parameters found in this menu.
Settings in
boldface
are the default and suggested settings.
Parameter
Description
Options
Bank 0/1 DRAM Timing
Bank 2/3 DRAM Timing
Bank 4/5 DRAM Timing
These items are used to set DRAM
timing parameters which can be
automatically set by BIOS.
SDRAM 10ns
SDRAM 8ns
Normal
Medium
Fast
Turbo
SDRAM Cycle Length
3
2
Ap4400-e.book Page 49 Friday, October 1, 1999 2:09 PM
Summary of Contents for AcerPower 4400
