manualshive.com logo in svg

Acer 505 series, User Manual, Page: 100 / 132

Share
Download
Acer 505 series User Manual Download Page 100

 5 Software

78

Display Device

Display Device is used to control various settings related to the display device(s), 
such as the display brightness/contrast levels.

The items in this screen include:

•

Boot Display Device.  Sets the default display device on boot-up.

•

Switching display device.  Sets the current display device.

Note: Make sure an external monitor is connected before External monitor is 
selected.

•

Brightness for LCD Panel.  Click and drag to set the LCD screen brightness 
and contrast levels

Note: TFT active-matrix LCDs have fixed and optimized contrast levels.

Click on the radio button of the desired item, then click on Apply to activate the 
setting.  To modify the brightness and/or contrast levels, click and hold the slider 
control and move to the right to increase or move to the left to decrease the setting.  
You can also click on the item and use the cursor keys to set the desired level.

Summary of Contents for 505 series





































































































































Reviews:

No comments