AXS
–
Ramp Manual
AXS FL RAMP Manual rev 1
16
Finally remove the wooden
transportation distance piece.
Check if the Feet assembly is
standing strait under 90 with the floor.
If not tighten or loose the M10
fixations bolts
Ramp stop / Ramp Anti rattling device.
You will also need to install the ramp stop at the door to prevent
the ramp for rattling or hitting against the rear door/window.
We recommend positioning this as high as possible at the door
The bracket needs to be fitted with the
two rivet nuts M8. (Drill Ø11 mm
holes).
Position the bracket so that the rubber
aligns with the rail of the ramp.
Place brackets left and right
Adjust the brackets so the ramp is
held tight when the door is closed.
Place the ramp in the vehicle and slide
over the mushrooms / mounting plate with
the slot holes.
Lock with the toggle device and adjust the
toggle if needed to get a tight fit to prevent
the ramp from rattling.
