AXS
–
Ramp Manual
AXS FL RAMP Manual rev 1
6
6
Mounting / Installation
The installation can only be carried out by a company familiar with building or modifying vehicles and
which has the staff qualified for such work.
6.1
Mechanical Installation
The fitting of the ramp does not involve major vehicle adaptations. The ramp is mounted on top of the
floor in the middle or rear door. No modification of the chassis is needed. Exact measurements of the
product should be taken from official installation drawings. Ask Acdeos for the final revision and official
installation drawing. The figures and drawings used in this manual are for indication only.
Mechanical Installation
Always create a safe working
environment. As the weight of
the ramp exceeds 25Kg; it is
advisable for
two people
to
be needed for lifting the ramp
in or out the vehicle.
Do not
remove the wooden
and steel transportation
distance pieces between the
feet assemblies until the ramp
is fitted into the vehicle.
Locate the exact position where the
ramp will be fitted at the floor. The
ramp should be placed as close as
possible to the door, leaving 3-7cm
clearance space when the door is
closed.