Page 4
Getting Started
Step 3
Transducer Installation
Mount the transducer vertically in the outdoor-air intake plenum in close proximity to
the probe(s) per Figure 2. The transducer should be located no more that 4 feet
from the probe. If it is not possible to mount the transducer into the outdoor-air
intake plenum, it can be mounted outside and external to the air handler (provided it
is in the shade) or in a machine room. If the transducer is going to be mounted in a
machine room or other location that is not in the outside air, the auxiliary
temperature probe (purchased separately) is required. Mount the transducer using
(4) screws suitable for the 3/16 holes provided in the mounting bracket.
This
mounting hardware is not included in the kit.
High
High
High
High
Low
Low
Low
Low
Step 4
Monitor Installation
Figure 2
System Installation
We recommend that the monitor be installed in a location that is protected from
environmental extremes such as the penthouse or mechanical room, however, the
monitor may be mounted outdoors providing the monitor will not be exposed to direct
sunlight and the specified operating conditions are not exceeded. The monitor
should be mounted in a location that is easily accessible for set-up. To access the
mounting holes remove the window door and mount the monitor using a minimum of
(4) #8 screws in the slots provided.
This mounting hardware is not included in the
kit.
