MR9610 Microplate Reader Operation Manual Chapter 5 Operation Guide
─
18
─
Fig 12
5. Result processing
The screen
will stay in the “Run” interface after detecting samples and will display the
original absorbance values measured. To view the analyzed results, switch to the “Result”
interface by pressing the Result button on the side bar, see Fig 13.
Fig 13
Results are displayed according to the protocol settings and measurement method.
The above Fig 13 shows results of an endpoint reading. Here, according to different types
of detection modes, the Result is divided into three modes: Endpoint, Kinetic and
Spectrum.
Summary of Contents for MR9610
Page 1: ......
Page 38: ...32 Memo ...
