Accuris MR9610, Operation Manual

Page: 21 / 38

MR9610 Microplate Reader Operation Manual Chapter 5 Operation Guide
─
15
─
⚫
Incubator: The plate chamber can be set to a specified temperature, and the actual
temperature is displayed.
⚫
Wavelength: shows wavelength parameters of the current protocol.
⚫
Shake: This function can be set to on or off.
⚫
Progress bar: displays the running status of the current protocol.
⚫
Plate in/out: control the motorized plate drawer to move it in and out; there is also a
physical control button on the front of the instrument.
⚫
Start/Stop: Used to start or stop a plate reading. There is also a physical button
on the front of the enclosure for start/stop.
⚫
Shake: This setting is independent from the shaking function in the settings menu,
it is specifically used for plate defoaming.
In “Run” mode, the window on the right side allows choosing a specific measurement
method: Endpoint, Kinetic or Spectrum, as well as reading parameters. See below table 2.