Accuris MR9610, Operation Manual

Page: 23 / 38

MR9610 Microplate Reader Operation Manual Chapter 5 Operation Guide
─
17
─
4.3 Reading a Plate
Click “ ” on the screen or press “Plate in/out” on the front of the enclosure to
open the plate drawer, load an ELISA plate on the plate holder, paying attention to the
orientation of the plate so the A1 well is in the correct location. See Fig 11.
Fig 11
Click button “ ” on the display or press the “Start” button on the front of the
instrument. If the protocol has already been run, a window will pop up to allow re-naming
the protocol results file. Input a file name, click “ok” to run the protocol. The plate drawer
will close, and during the reading process the screen will turn grey (see Fig 12) and all
buttons will become inoperable with the exception of the
stop button “ ”. The user can
also press the “Stop” button on the front of the housing to stop a run.