MR9610 Microplate Reader Operation Manual Chapter 5 Operation Guide
─
14
─
Fig 9
Note: The plate layout can be set up before or after the plate is read. For
example, users can set all wells as “unknown”, read the absorbance values, then set
up the layout of the plate. The absorbance value data and layout are separate,
users can create or modify a layout to analyze absorbance data that was captured in
the past.
Note: the absorbance values of a test cannot be changed!
4.2 Parameter setting
After completing the plate layout settings, click “Run” on the left side bar (see Fig 10.)
Fig 10
After clicking “Run” the lower window becomes a controller with the following functions:
Summary of Contents for MR9610
Page 1: ......
Page 38: ...32 Memo ...