![background image](http://html.mh-extra.com/html/accurate-technology/digiscale-18/digiscale-18_user-manual_456529017.webp)
Accurate Technology DigiScale Models 18 & 28 User Manual
Page 17 of 36
Circuit Board Jumpers
The Digi readout has several user configurable jumpers consisting of three
pins and a ‘shorting block or jumper’.
The center of these three pins is ‘Common’.
One end pin is labeled A and the other end pin is labeled B.
JP1
FACTORY USE ONLY
JP2
Programming Lockout
Position A, Front Panel Programming is ENABLED
Position B, Front Panel Programming is DISABLED
JP1
JP2