Manual Part # 800-1404-001, Rev B
Page 28 of 36
Operation
Readout Keys
TIMING
The keys on your readout, illustrated below, have multiple functions. Timing,
(how long a key is depressed) is important. This manual uses the terms
“momentarily” to describe a key press of less than 0.8 seconds and “press
and hold” to describe a key press of 2 seconds or longer. See Table Below.
The execution of a key’s function is performed on “key release” for
momentary key presses and after the allotted time has elapsed for “press &
hold” operations. See Table Below.
Momentarily Press
Press & Hold
IN/MM
Cycles measurement units
displayed: inches, fractions, mm
3 seconds: Toggles between
ABSolute and INCremental modes
(When in programming
mode)
Cycles program parameter list
Has no effect
+
-
(plus & minus keys)
Increments or Decrements
displayed value
Increments or Decrements displayed
value faster
DATUM
Forces readout to programmed
value in Pr 1
7 seconds: Displays FW version
9 seconds: Enters Programming
mode
3 seconds: Exits programming mode
Momentarily
Press & Hold
How long a key is pressed?
Less than 0.8 seconds
More than 2 seconds
When is key function is executed?
On key release
While holding
