Accurate Locators XL16 IMAGER, User Manual

Page: 23 / 67

HERE IS A BRIEF OVERVIEW OF FUNCTIONS WITH THE GEOSURVEYOR SOFTWARE.
- 23 -
Rotation control buttons. With these buttons, you can rotate the
scan up, down, left and right. The “C” (Center) button will clear all
rotation and set the scan back to a top 2-D View.
The two lower buttons rotate the scan on the Z-axis.
Scan position button. With these buttons you can more entire scans
towards top, bottom, left or right of screen to center scan.
You can Zoom In or Zoom Out of your current view
Adjusts visuals of scan relative to original ground balance point 0.0
Cross Hairs Buttons
With these buttons, you can move the Cross Hairs to any desired
point on the scan
GPS Indicator
You have the ability to enable GPS from this button. It will also give
you a visual of the connect quality. When connected it will also show
Dilution of Precision data as your satellite data improves or
decreases
Color Legend
The color legend signifies what the colors on the screen represent in
terms of signal strength. Typically, steel, iron and other ferrous
metal targets will appear in the reds or yellows. Non-ferrous metals
can appear in orange or blues depending on concentration. Tunnels,
voids and pockets will appear in light and dark blues.
Color Filter Buttons
With these buttons, you can either increase the amount of red or
blue in the scan.