(Fig 4.3)
(fig4.4)
User Defined 1 -4
:
Enables the user to pre-program views and angles of scans for easier
recognition of targets
To set the “User Defined Views” first put the scan in the view that you would like have as
a preset then click on the “View” button then scroll down the list to “Define Rotations”
then click on the desired View to set the view. You can change any of the “User Defined”
views by repeating the above procedure
.
(Fig 4.5)
Status Bar
The status bar (Figure4.5), which is located at the bottom of the screen, shows current
Crosshair Point location and also the name and directory of the file that is currently open.
Crosshair Point – This give the exact location in terms of a counter (0:0). The first number
of the counter is how many pulses forward from the start point. The second number of the
counter is how many survey lines to the right of the start point. The start point is
always“0:0”.
- 22 -
Summary of Contents for XL16 IMAGER
