![background image](http://html.mh-extra.com/html/beinat/rgx100/rgx100_quick-start-manual_2723716001.webp)
230 VAC
12 VDC
230 VAC
12 VDC
Belonging to
To protect your family
RGX100 -
V. 14
Household gas detector
Important: Assembly / maintenance of the appliance must be carried out by qualified personnel and in
accordance with applicable laws and regulations.
The manufacturer assumes no responsibility for the use of products that have to comply with particular
environmental and / or installation standards.
Important note
Before connecting the equipment, it is recommended that you read the instruction manual carefully and
keep it for future reference. It is also recommended to perform the electrical connections correctly as
per enclosed drawings, observing the instructions and the Standards.
N.B. Refer to the documentation in all cases where the symbol is on the side
Channel: Beinat gas solutions
Electric connections also available on
CONFORMITY
Installation and user
guide
EN 50194
EN 50270
CEI 216-3
EN 61010-1
Installation EN 60079-29-2
Reports issued by TUV Italia
The elegance and the prestige, that have always made BEINAT S.r.l stand out from its competitors,
together with the concept of home fitness comes the household gas detector RGX100 detects
through the catalytic sensor , the presence of explosive gas such as: Methane, LPG.
Gas detection
The detector is tested and calibrated to 10% of L.E.L.
The power supply unit allows driving of a manual reset solenoid valve with a 12Vdc coil, without any buffer
battery. If the voltage absorption is too high, you can later integrate a suitable backup battery. The
battery is recharged automatically.
Through the built-in relay, the RGX100 can activate: solenoid valves, sirens, and any other device
alarm.
A series of technical features make this gas detector extremely versatile, reliable, accurate, and safe.
through an internal jumper it is possible to select the relay impulse functioning, to connect manual
reset solenoid valves, or the continuous functioning, to activate class “A” solenoid valves and sirens.
The relay, free of voltage, allows installation of multiple detectors on a single solenoid valve ensuring
control of multiple dangerous environments.
The detector is complete with a special circuit that controls the catalytic sensor’s efficiency
level, and signals any possible fault
These technical features make the detector ideal for the safety of civil environments according to
EUROPEAN STANDARD.