37
< ID usage >
ID USAGE can be turned off or on.
- Select
(ID usage) on SYSTEM SETUP screen and
press ‘SET’ on touch pad.
- Preset: NO, FLASH MEMORY
- ID USAGE: Choose ID USAGE on touch pad. Choose
YES or NO on touch pad.
- SAVE DEVICE: From SAVE DEVICE, select either FLASH MEMORY or USB MEMORY to save
the analysis.
- If ID usage is activated, an up to 20-digit ID can be input and saved in FLASH memory or USB
memory.
- Press ‘SET’ button on touch pad to save it.
- Return to SYSTEM SETUP screen by pressing ‘CLOSE’ button on touch pad.
Note
1. If ID function is activated, ID window will pop up at the initial screen. So the
user can input ID and save the results. If ID function is not activated, the user
should input basic information before the test starts.
2. If FLASH MEMORY is selected, the results are saved in flash memory in the
machine itself. If USB MEMORY is selected, the results are saved in portable
USB memory stick.
Note
1. When FLASH MEMORY is used,
①
Up to 100,000 results can be saved. If the number of saved results exceeds
100,000, the new result will overwrite the oldest result. The results can be
deleted and initialized.
②
The result sheet can be printed from an A4 printer and a thermal printer.
2. When USB MEMORY is used,
①
It is possible to save over 100,000 results. The number of storage differs
depending on the capacity of USB MEMORY.
②
The result sheet can be printed only from thermal printer.
3. The user should use USB memory (option) supplied only from our factory.
Problems caused by USBs which users randomly purchase are not subject to
the manufacturer’s responsibility.
Summary of Contents for BC360
Page 1: ......
