50
1. Storage of data
1) On selecting FLASH MEMORY
①
Insert USB memory stick into USB(A) jack placed on the
back side of the device.
②
The following message appears.
‘Do you want to write data to USB memory stick?’ on
initial screen. Press ‘YES’ to send to USB memory.
Transmitting
③
message will be displayed on the screen.
When transmission is completed, the message ‘The data
writing was completed’ will be shown. Press CLOSE to complete the saving process.
2) On selecting USB MEMORY
When ‘USB MEMORY’ is selected, measurement data will be stored to USB MEMORY without
notification.
Data can only be saved when USB MEMORY is inserted only at the initial screen of device.
If USB MEMORY is not inserted during the measurement, the message “USB MEMORY is not
connected’ appears. Data will not be stored.
Please insert USB MEMORY and measure again.
If the message above appears even when USB memory stick is inserted, take out the USB
MEMORY and insert it again. Please use the USB MEMORY which is provided by SELVAS
Healthcare, Inc.
Note
The data can be saved only when ‘ID USAGE’ function is activated in SYSTEM
SETUP.
Summary of Contents for BC360
Page 1: ......
